Share via email
Some fields are missing
Bürkert - Close to you
Office /2
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center

    Servo-assisted 2/2-way piston valve

    Type 6407 / Article No. 467802

    Produkt-Foto Typ 6407

    Specific products may differ slightly from the general images shown.

    Please consider the technical attributes.

    Servo-assisted 2/2 way piston valve

    • Servo-assisted piston valve up to DN50 orifice
    • Safe opening with hard-coupled piston system without differential pressure
    • Vibration-resistant, push-over coil system
    • Explosion-proof versions
    • Energy-saving double coil technology with kick and drop design

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

    Product description

    The Type 6407 valve is a servo-assisted piston valve. The fix coupling between pilot valve and piston provides an opening of the valve without pressure difference. As a piston valve, the Type 6407 is particular suitable for media such as gas and steam. As well as liquids with low operating temperature below 0°C.The stopper and the core guide pipe are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics (double coil technology) are available. In combination with a plug acc. to DIN EN 175301-803 Form A, the valves satisfy IP65 degree of protection.

    Commodity Codes

    Technical attributes

    Typ 6407
    Circuit function 2/2-ways; normally closed
    Orifice size 50mm (2")
    Seal material EG PTFE-seat-sealing + graphite
    Material brass
    Port connection NPT 2 threaded port
    Coil size 72 x 72
    Voltage 110 volts
    Frequency AC/DC
    Power consumption 30 watt
    Special feature electr. connection only by connector with rectifier
    Cable plug type 2518 (00314839), rectifier and varistor, 220-240V AC/DC
    steam version
    Coil material insulation class H
    Show full table Collapse table


    Data Sheets

    Language / Country
    DTS Type 6407 data sheet | Servo-assisted piston valve 1 MB EN / EU
    DTS Typ 6407 Datenblatt | Servogesteuertes Kolbenventil 1 MB DE / DE

    User Manuals

    Language / Country
    MAN Operating Instructions Type 6407 | 2/2-way solenoid valve 854 kB EN / EU
    MAN Bedienungsanleitung Typ 6407 | 2/2-Wege-Magnetventil 859 kB DE / DE
    MAN Manual de instrucciones Modelo 6407 | Electroválvula de 2/2 vías 902 kB ES / ES
    MAN Manuel d'utilisation Type 6407 | Électrovanne 2/2 voies 864 kB FR / FR

    EU Declaration of Conformity

    Language / Country
    ABD EU-DoC|EU Declaration 3 MB EN,FR,DE

    Flyers and Catalogues

    Language / Country
    MISC Overview of approvals: Solenoid valves 8 MB EN / EU
    MISC Selection Chart Solenoid valves 517 kB EN / EU

    My Comparison List