2/2-way Whisper Valve with media separation
Type 6712 / Article No. 273206
Product description
Fluidic “point-of-care” applications, such as dialysis or artificial respiration, and “point-of-use” applications, such as at pipetting arms in biological analysis, present special requirements. The new, media-separated Whisper Valve Type 6712 was developed for precisely these applications. It sets new benchmarks particularly with low switching noise and excellent cleanability. However, the Type 6712 is also the first choice in industrial applications, such as inkjet printers, thanks to its long service life and excellent switching dynamics. The valve’s modular design and available material variants means that it can be used with practically all liquids and gases in the fields of life sciences and industrial applications. This is a valve that combines dosing accuracy and cleanability.
- Commodity Codes
- 84818079
- Country
- DE
Technical attributes
Name |
Value |
Unit |
---|---|---|
Type | 6712 | |
Valve construction | Valve complete | |
Valve function manual actuation | No | |
Valve diameter | 0,4 | mm |
Media separation | Yes | |
QNn value (gas) | 5,8 | l/min |
Kv value (water) | 0,005 | m3/h |
Differential pressure max | 5 | bar |
Back pressure max | 1,8 | bar |
Nominal pressure min | 0 | bar |
Nominal pressure max | 5 | bar |
Actuator type | Whisper-Plunger valve (diaphragm) | |
Switch function | on/off | |
Valve function | A - normally closed - inlet port 1 (P/NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Operation | direct-acting | |
Flow | Below seat | |
Port connection 1 type | Flanged | |
Port connection 1 flange | Bürkert flange 7 x 18,2 version A1 | |
Port connection 2 type | Flanged | |
Port connection 2 flange | Bürkert flange 7 x 18,2 version A1 | |
Switch time open characteristic | 0,9 | ms |
Switch time close characteristic | 1,8 | ms |
Nominal operation/Duty cycle | 100 | % |
Coil type | permanently integrated | |
Coil insulation material (encasement) | Iron steel nickel-plated | |
Coil wiring LED | No | |
Coil wiring overvoltage protection | without | |
Coil wiring rectifier | No | |
Coil wiring polarity protection | No | |
Coil wiring polarity recovery diode | No | |
Coil wiring polarity recovery diode redundant | No | |
Rated power DC | 0,93 | W |
Rated power consumption | 0,9 | W |
Power reduction integrated | No | |
Installation width (nominal value) | 7 | mm |
Electrical connection sort | Wire strand | |
Electrical connection number of contacts | 2 | |
Electrical connection position | via outlet | |
Electrical connection wire length | 500 | mm |
Electrical connection lead 1 colour | black | |
Electrical connection lead 2 colour | red | |
Electrical connection wire cross-section | AWG 26 | |
Electrical connection wire cross-section (mm²) | 0,14 | mm² |
Electrical connection wire ready-made | tinned | |
Electrical connection 1 wire material | PVC (Polyvinyl chloride) | |
Electrical connection polarity | red wire + , black wire - | |
Voltage / rated voltage | 24 | V |
Voltage / rated voltage | 24 | V |
AC voltage | No | |
DC voltage | No | |
Battery voltage | Yes | |
Protection type (IP max. with suitable connector) | IP40 | |
Temperature environment min | 10 | °C |
Temperature environment max | 55 | °C |
Temperature medium min | 10 | °C |
Temperature medium max | 55 | °C |
Mounting type | Metric screws | |
Mounting dimensions | M1,6 x 8 | |
Mounting (flange) type | Metric screws | |
Mounting (flange) material | Stainless steel | |
Fluidics body material | PEEK (Polyetheretherketone) | |
Seat seal material category | Elastomer | |
Seat seal material | FFKM (Perfluoroelastomer rubber) | |
Sealing toward outside material | FFKM (Perfluoroelastomer rubber) | |
Port connection seal material design | O-ring | |
Weight | 0,016 | kg |