211535 - Remote sensor / Side Control / Positioners / Process Controllers / Control Valves / Process and Control Valves

Specific products may differ slightly from the general images shown.

Please consider the technical attributes.

Remote sensor

Digital signal transmission to remote positioner / prosess Controller
Variable cable length
Mounting acc. to NAMUR/IEC534-6 or VDI/VDE 3845 (rotative Sensor)
Integrated mounting on piston actuators (linear Sensor)
With ATEX II cat. 3G/D approval (linear Sensor)

To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

Product description

The remote sensor Type 8798 is a digital non-contact position sensor for use on pneumatically actuated modulating actuators. This Remote Sensor is available in two versions; as linear and as rotative position sensor and is used in combination with the Positioner Type 8791/8792 and Process Controller Type 8793 (remote version). The linear Remote Sensor can be combined with our process valves ELEMENT Typ 210x/230X and CLASSIC Type 27xx Series. Whereas the rotative Remote Sensor can be mounted on linear actuators in accordance with NAMUR recommendation (DIN IEC 534-6) or rotary actuators in accordance with VDI/VDE 3845.

Commodity Codes: 90330090
Country: DE

Technical attributes

Name	Value	Unit
Type	8798
Product sub-group	Positioner / Process Controller
Function	Remote sensor
Pneumatic function 1 double acting	Yes
Pneumatic function 1 single acting	Yes
Temperature environment min	-25	°C
Temperature environment max	80	°C
End position feedback internal	0	PCE
End position feedback external	0	PCE
End position feedback DC voltage	No
End position feedback AC voltage	No
Displacement transducer type	internal linear
Displacement transducer signal	digital
Positioning system with booster function	No
For Actuator size 40 mm	No
For Actuator size 50mm	Yes
For Actuator size 63mm	Yes
For Actuator size 70mm	No
For Actuator size 80mm	Yes
For Actuator size 90mm	No
For Actuator size 100mm	Yes
For Actuator size 125mm	Yes
For Actuator size 130mm	No
For Actuator size 175mm	Yes
For Actuator size 225mm	Yes
Electrical connection sort	Wire cable
Electrical connection wire length	10.000	mm
Electrical connection wire ready-made	Wire end ferrule
Voltage / rated voltage	24	V
Voltage / rated voltage	24	V
Supply system-internal	No
Supply via BUS	No
Supply via separating barrier	No
AC voltage	No
DC voltage	Yes
Output 1 type digital	Serial (bus)
Mounting type	CLASSIC drive
Protection type (IP max. with suitable connector)	IP65/67
Weight	0,89	kg
Approval type	UL
Certification type	cULus Listed

Show full table Collapse table

Can be combined with

Type 2301

Pneumatically operated 2 way Globe Control Valve

Type 2300

Pneumatically operated 2 way angle seat...

Type 2103

Pneumatically operated 2/2-way diaphragm...

Type 8792

Digital electropneumatic Positioner SideControl

Type 8793

Digital electropneumatic Process Controller...

Show full table Collapse table

Applications & Tools

CAD Model

Downloads

User Manuals

Description	Filesize	Language / Country
Additional manual Type 8690 869X 8798 \| Control units with ATEX approval	1 MB	EN / EU
Additional manual Type 8691 869X 8798 \| Replace puck	701 kB	EN,FR,DE / EU
Operating Instructions Type 8798 \| Remote Sensor, rotating and linear position measuring	2 MB	EN,FR,DE / EU
Bedienungsanleitung Typ 8798 \|Rotativer und linearer Wegaufnehmer für Stellungsregler	2 MB	DE / DE
Manuel d‘utilisation Type 8798\| Système de mesure de déplacement linéaire	2 MB	FR / FR
Manuel supplémentaire Type 8690 8691 8692 8693 8694 8695 8696 8798 \| AC181 homologat. ATEX	1 MB	FR / FR
Zusatzanleitung Typ 8690 8691 8692 8693 8694 8695 8696 8798 \| AC181 ATEX-Zulassung	999 kB	DE / DE

EU Declaration of Conformity

	Description	Filesize	Language / Country
	EU-DoC\|EU Declaration	2 MB	EN,FR,DE

Remote sensor für pneumatically actuated process valves

Type 8798 / Article No. 211535