Direct-acting 2/2 or 3/2 way pivoted armature valve

Type 0331 / Ident No. 20278

Specific products may differ slightly from the general images shown.

2/2-way-solenoid valve f.aggress. medium

Direct-acting, media-separated valve with diameter of up to DN 4
Pilot valve with Bürkert-specific flange design (SFB)
Maintenance-free pivoted armature technology
Suitable for aggressive alkaline and acidic solutions
Service-friendly, robust manual override

To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

Product description

The 0331 valve is a direct-acting, media-separated pivoted armature valve. It is available in 3/2 and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Stainless steel (316L), PVDF, and polypropylene housing versions complete the offering. The solenoid coils are moulded with a chemically resistant epoxy. The 0331 is equipped with manual override for commissioning and testing. For reduced energy requirements all coils can be delivered with electronic power reduction or as an impulse version. The switching status can be indicated with position feedback as a binary or NAMUR signal. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65/67 – in combination with a stainless steel or plastic housing NEMA 4X.

Commodity Codes: 84818079
Country: DE

Technical attributes

Name	Value	Unit
Type	0331
Operation	direct-acting
Actuator type	Pivot
Main valve operating principle	Globe valve
Switch function	on/off
Media separation	Yes
Valve function	A - normally closed - inlet port 1 (P/NC)
Fluidic port connection number	2
Valve function number of switching positions	2
Valve function manual actuation	Yes
Valve function manual actuation type	Key button
Valve function manual actuation material	PA (Polyamide)
Valve function manual actuation stop	Yes
Flow	Below seat
Nominal pressure min	0	bar
Nominal pressure max (liquid)	5	bar
Main valve orifice 1 (P) (mm)	4	mm
Main valve orifice 1 (inch)	5/32 inch
Kv value (water)	0.18	m3/h
QNn value (gas)	325	l/min
Main valve wetted material	PP (Polypropylene)
Port connection 1 type	Flanged
Port connection 1 flange	Bürkert flange 32 x 46 version A2
Port connection 2 type	Flanged
Port connection 2 flange	Bürkert flange 32 x 46 version A2
Valve seat material	PP (Polypropylene)
Seat seal material category	Elastomer
Seat seal material	FKM (Fluor rubber)
Seat seal material Shore hardness	70
Sealing toward outside material	FKM (Fluor rubber)
Temperature environment max	55	°C
Temperature medium min	0	°C
Temperature medium max	80	°C
Temperature surface max	150	°C
Voltage / rated voltage	230	V
Voltage / rated voltage	230	V
Voltage tolerance negative	10	%
Voltage tolerance positive	10	%
Voltage frequency	50	Hz
AC voltage	Yes
DC voltage	No
Battery voltage	No
Rated power consumption	8	W
inrush power consumption AC	30	V·A
Rated power AC	15	V·A
Electrical connection sort	Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts	2 + Grounding conductor
Cable plug in delivery	enclosed
Cable plug art. no. - type	00132445 - 2508
Electrical connection position	top
Electrical connection polarity	Irrelevant
Electrical connection material	Brass
Protection type (IP max. with suitable connector)	IP65
Coil type	block bolted
Coil insulation material category (encasement)	Plastics
Coil insulation material (encasement)	Epoxy
Coil wiring overvoltage protection	without
Coil wiring rectifier	No
Coil wiring polarity protection	No
Coil wiring polarity recovery diode	No
Thermal insulation class of the actuator	H
Nominal operation/Duty cycle	40	%
Switch time open min	8	ms
Switch time open max.	15	ms
Switch time close min	8	ms
Switch time close max.	15	ms
Valve setting opening time	No
Valve setting closing time	No
Back-pressure-resistant version	No
Vacuum version	No
Analysis version	No
Oil burner valve	No
Steam version	No
Low-noise version	No
Main valve with integrated screen	No
Installation length	46	mm
Without mounting	No
Mounting type	Metric screws
Valve construction	Valve complete
Weight	0,320000	kg

Show full table Collapse table

Can be combined with

Type 2508

Cable Plug Form A

Type 1078

Timer Unit

Show full table Collapse table

Applications & Tools

Downloads

Data Sheets

	Description	Filesize	Language / Country
	Type 0331 data sheet \| pivoted armature valve	1.1 MB	EN / EU
	Typ 0331 Datenblatt \| Klappanker-Magnetventil	1.1 MB	DE / DE

User Manuals

Description	Filesize	Language / Country
Additional manual Type 6013 \| PX04 Use in the explosion-hazard area	138.7 kB	EN,FR,DE / EU
Operating Instructions Type 012X 0330 033X \| 2/2-way and 3/2-way solenoid valve	1.8 MB	EN,FR,DE / EU
Operating Instructions Type 0330 0331 \| 2/2-way or 3/2-way solenoid valves, direct-acting	571.2 kB	EN / EU
Operating Instructions Type 0780 \| ATEX approval	1.5 MB	EN,FR,DE / EU
Operating Instructions Type ACP016 \| Solenoid coil ACP016, II 2G/D Ex approval	1.5 MB	EN / EU
Bedienungsanleitung Typ ACP016 \| Magnetspule ACP016, II 2G/D Ex Zulassung	1.5 MB	DE / DE
Manuel d'utilisation Type ACP016 \| Bobine magnétique ACP016, homologation II 2G/D Ex	1.6 MB	FR / FR

EU Declaration

	Description	Filesize	Language / Country
	EU-DoC\|EU Declaration	2.5 MB	EN,FR,DE

Flyers and Catalogues

	Description	Filesize	Language / Country
	Selection Chart Solenoid valves	4.3 MB	EU