Type 2400 - 2/2 way Solenoid Valve Servo-operated for High Pressure

Specific products may differ slightly from the general images shown.

Type Description

The servo-assisted Type 2400 valve has aservo-piston with a 2-way servo-control. It is designed for high pressures. The speciality of this valve design lies in the layout of the seat and sealing element. Anadditional radial seal make very good sealing possible. The tapered sealing element of the servocontrol permits the switching of high pressureat relatively low coil power.

Push-over solenoid system
Special versions, up to 250 bar, up to DN 12
Stainless steel body

To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

Applications & Tools

Downloads

Data Sheets

Description	Filesize	Language / Country
Type 2400 data sheet \| servo-assisted piston valve	247.6 kB	EN / EU
Type 2400 data sheet \| servo-assisted piston valve [US units]	247.3 kB	EN / US
Typ 2400 Datenblatt \| servogesteuertes Kolbenventil	249.4 kB	DE / DE
类型 2400 参数表 \| 伺控 2 位 2 通活塞阀	352.7 kB	ZH / CN

User Manuals

Description	Filesize	Language / Country
Additional manual Type 0721 \| Type X, IIC 2G Ex mb or IIC 2G Ex e mb ATEX-approval	584 kB	EN / EU
Operating Instructions Type 2400 \| 2/2-way solenoid-operated valve	310.6 kB	,EN,FR,DE,IT,ES / EU
Bedienungsanleitung Typ 2400 \| 2/2-Wege-Magnetventil, DN5 /DN8	655.4 kB	DE / DE
Manuel supplémentaire Type 0407 \| Type X, IIC 2G Ex mb, IIC2G Ex e mb homologation ATEX	587.4 kB	DE / FR
Zusatzanleitung Typ 0721 \| Type X, IIC 2G Ex mb bzw. IIC 2GEx e mb ATEX-Zulassung	571.2 kB	DE / DE

EU Declaration

	Description	Filesize	Language / Country
	EU-DoC\|EU Declaration	1.7 MB	EN,FR,DE

Share via email

Any questions?