Type 6126 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

Specific products may differ slightly from the general images shown.

Type Description

The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively with the housing material and the FKM seals. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.

With isolating diaphragm
Compact design with 16 mm width and Cv ratings up to 0.058
Flexible design for custom manifold assemblies
High back pressure tightness, excellent cleanability and 100 % duty cycle
Normally closed, normally open and universal function

To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

Can be combined with

Type 2505

Socket for 10mm for Bürkert Solenoid Valves

Show full table Collapse table

Applications & Tools

Chemical Resistance Chart

Downloads

EU Declaration

	Description	Filename	Filesize	Language / Country
	EU-DoC\|EU Declaration	1000321347-0_6126_EU-DoC.pdf	866.2 kB	EN,FR,DE

Data Sheets

Description	Filename	Filesize	Language / Country
Minature Rocker Solenoid	DS6126-Standard-US-EN.pdf	729.9 kB	EN / US
Solenoid valve, 2/2 or 3/2	DS6126-Standard-EU-EN.pdf	363.2 kB	EN / EU
Magnetventil, 2/2 und 3/2	DS6126-Standard-DE-DE.pdf	378.5 kB	DE / DE

User Manuals

	Description	Filename	Filesize	Language / Country
	Standard	MA6126-Standard-EU-ML.pdf	2.5 MB	EN,FR,DE / EU

Any questions?