Any questions?

We’re here to help!

Please give us a call:
+1 (905) 632-3033

Bürkert - Close to you
Office /2
    • Main Office
      Burkert Contromatic Inc.
      5002 South Service Road
      Burlington, Ontario L7L 5Y7
      Phone +1 905 632 3033
      Fax +1 905 632 3833
      E-Mail fnyrf.pn@ohexreg.pbz
    • Office
      Montreal Sales Center Bürkert Contromatic Inc.
      8104 Trans Canada Highway
      St. Laurent, Quebec H4S 1M5
      Phone +1 514 336 9033
      Fax +1 514 336 9034
      E-Mail fnyrf.pn@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8026 - INSERTION flowmeter with paddle wheel, ELEMENT design

    Produkt-Foto Typ 8026

    Specific products may differ slightly from the general images shown.

    • Produkt-Foto Typ 8026
    • Produkt-Foto Typ
    • Produkt-Foto Typ

    Type Description

    The Bürkert flowmeter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing etc.). Type 8026 is available with: - 2 configurable outputs: one transistor output (NPN) and one 4...20 mA current output (2-wire) - 3 configurable outputs: two transistor outputs (NPN/PNP) and one 4...20 mA current output (2-wire) - 4 configurable outputs: two transistor outputs (NPN/PNP) and two 4...20 mA current outputs (3-wire). Type 8026 converts the measured signal, displays different values in different units (if display/configuration module mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.

    • Up to PN10, size of measurement pipes: DN20 to DN400
    • Configurable outputs: one or two transistor output(s) and single
    • Removable backlit display/configuration module for indication of flow rate and volume with two flow totalizers
    • Automatic calibration using Teach-In, all outputs can be checked without the need of actual flow

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Fitting for insertion Sensor 402.9 kB EN / EU
    DTS Flowmeter ELEMENT 2.1 MB EN / EU
    DTS Durchflussmessgerät ELEMENT 2.1 MB DE / DE
    DTS Débitmètre ELEMENT 2.1 MB FR / FR
    DTS Fitting für Insertion-Sensor 400.7 kB DE / DE
    DTS Raccord à insertion 400.2 kB FR / FR
    DTS Transmisor Caudal ELEMENT ins 2.4 MB ES / ES

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Fitting for insertion devices 1.5 MB EN,FR,DE / EU
    MAN Op Instructions 8026-8036-SE36 5.2 MB EN / EU
    MAN Operating Instruction Display 808.8 kB EN,FR,DE / EU
    MAN Quickstart 8026-8036-SE36 6 MB EN,FR,DE / EU
    MAN Bedienungsanlei 8026-8036-SE36 5.2 MB DE / EU
    MAN Man. utilisat° 8026-8036-SE36 5.2 MB FR / EU

    EU Declaration

    Description
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 469.2 kB ML

    Available products