Any questions?

We’re here to help!

Please give us a call »

Bürkert - Close to you
Office /2
    • Main Office
      Burkert Contromatic Inc.
      5002 South Service Road
      Burlington, Ontario L7L 5Y7
      Phone +1 905 632 3033
      Fax +1 905 632 3833
      E-Mail fnyrf.pn@ohexreg.pbz
    • Office
      Montreal Sales Center Bürkert Contromatic Inc.
      8104 Trans Canada Highway
      St. Laurent, Quebec H4S 1M5
      Phone +1 514 336 9033
      Fax +1 514 336 9034
      E-Mail fnyrf.pn@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8232 - Chlorine Sensor

    Produkt-Foto Typ 8232

    Specific products may differ slightly from the general images shown.

    • Produkt-Foto Typ 8232
    • Produkt-Foto Typ 8232

    Type Description

    The 8232 from Bürkert is an electrochemical sensor designed for the measurement of the free chlorine concentration generated from inorganic sources (chlorine gas, sodium hypochlorite solution,...). Type 8232 offer a range of three models: • the “Trace” chlorine sensor (zero-chlorine) with three electrodes is suitable for the measuring of chlorine at very low concentrations. The membrane of this sensor is protected against biofouling. The sensor works in water without chlorine up to four weeks. It is available with a voltage output on a four-pin fixed connector. • the chlorine sensor with three electrodes has a sensor with greatly reduced pH-dependency. This model delivers a current output on a M12 connector and is designed to be used in a swimming pool, drinking or sea water. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm). • the chlorine sensor with two electrodes delivers a current output on a M12 connector. It is designed to be used using in a swimming pool, drinking or process water. The fluid to be measured must not contain any surfactants or abrasive particles and its pH value must be at a constant level. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm).

    • Chlorine sensor “Trace” with three electrodes for measuring at low concentration
    • Chlorine sensor with three electrodes and greatly reduced pH dependency
    • Chlorine sensor with two electrodes for standard applications at constant pH

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Typ 8232 Datenblatt | elektrochemischer Chlorsensor 1.7 MB EN / EU
    DTS Typ 8232 Datenblatt | elektrochemischer Chlorsensor 1.7 MB DE / DE
    DTS Type 8232 fiches techniques |Capteur de chlore électrochimique 1.7 MB FR / FR

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Operating Instructions Type 8232 | Electrochemical chlorinesensor 448.8 kB EN / EU
    MAN Bedienungsanleitung Typ 8232 | Elektroschemischer Chlorsensor 456.5 kB DE / EU
    MAN Manuel d?utilisation Type 8232 | Capteur de chlore électrochimique 459 kB FR / EU

    My Comparison List